UC Davis Develops New Carbon Fiber CT Table for Horses

UC Davis Develops New Carbon Fiber CT Table for Horses

Jason Peters, RVT, RLAT, a technician in the hospital’s diagnostic imaging service, recently created a new CT table that will improve how scans on horses are performed.

Photo: Courtesy University of California Davis

Performing a CT scan on a horse is a laborious process that takes a team of nearly a dozen technicians and veterinarians. It involves forklifts and cranes and the skills of veterinary technicians who have mastered this task after years of repetition. Thanks to one University of California, Davis (UC Davis), imaging technician, however, that process just got a lot less complicated. 

Jason Peters, RVT, RLAT, a technician in the hospital’s diagnostic imaging service, recently created a new CT table that will improve how scans on horses are performed.

“We set out to acquire a new large animal table for CT,” said Peters, noting that the existing table has been in use at UC Davis for 30 years. “Due to our room configuration, however, we could not purchase a pre-existing table. So, we decided to build our own.”

After the UC Davis team discussed types of materials for the project, and knowing they would need to build a massive table that could handle thousands of pounds, carbon fiber stood out. Carbon fiber is an easily molded material that will take on any shape and strength. NASA uses it for many applications in the space program due to its strength-to-weight ratio, high stiffness, chemical resistance, and temperature tolerances. Carbon fiber is also used in exotic sports cars (Ferrari, Lamborghini, etc.), motorcycles, bicycles, and sailboats. 

“Just because something is made from carbon fiber, however, doesn’t mean it’s strong,” said Peters. “If it’s not molded correctly, that greatly affects the strength and durability of the piece. So, we made sure to work with professionals who knew the best techniques.”

Using plans developed in conjunction with the UC Davis College of Engineering, Peters worked with Finishline Advanced Composites, a Bay Area carbon fiber manufacturer that specializes in automotive parts. Together, they designed a table that weighs only 100 pounds but can handle up to 10,000 pounds in any given area. This ensures that the table can support off-balanced loads and certain impacts during loading and unloading of a large animal patient. The old table weighs twice as much and is not nearly as strong.

Another drawback to the old table is its stationary position. If a horse needed both front and hind legs scanned, technicians would need to physically reposition the horse. Keeping this in mind, Peters incorporated slide actuators under the table that enable it to move side to side and to and from the CT machine. Now, the horse can remain stationary, and the table can be easily moved into position.

When a small animal CT is immediately following a horse, the new table can be quickly dismantled by removing locking pins in the legs and lifting the table out of place. Peters estimates that it now takes half the time to switch between small animal to large animal.

Extension plates were also manufactured to provide an extra surface for anatomy that does not fit on the main table. These pieces were made in the same manner as the main table and were engineered to hinge onto it at any given point. 

The new table accommodates skulls and extremities of the equine, bovine, or exotic animal.

Stay on top of the most recent Horse Health news with FREE weekly newsletters from TheHorse.com. Learn More